ATF750C-10PU
| Parameters | |
|---|---|
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height | 4.95mm |
| Length | 32.13mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 3.740011g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF750C(L) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Additional Feature | NO |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 90MHz |
| Base Part Number | ATF750 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 750 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
ATF750C-10PU Overview
Currently, there are 10 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is embedded in the 24-DIP (0.300, 7.62mm) package.It is equipped with 10I/O ports.It is programmed to terminate devices at [0].This electrical part has a terminal position of DUALand is connected to the ground.The device is powered by a voltage of 5V volts.It is a part of the family [0].It is recommended to package the chip by Tube.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is mounted in the way of Through Hole.In FPGA terms, it is a type of ATF750C(L)series FPGA.This device also displays [0].The ATF750indicates that related parts can be found.750gates are used to construct digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Through Holeis the mounting point of this electronic part.A total of 24pins are provided on this board.A maximum supply voltage of 5.5Vis used in its operation.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.It runs on a voltage of 5Vvolts.It is possible to achieve a frequency of 90MHz.To detect the status of input signals, there are 11dedicated inputs.
ATF750C-10PU Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pins
5V power supplies
ATF750C-10PU Applications
There are a lot of Microchip Technology ATF750C-10PU CPLDs applications.
- State machine control
- Digital systems
- Custom state machines
- STANDARD SERIAL INTERFACE UART
- Bootloaders for FPGAs
- USB Bus
- ToR/Aggregation/Core Switch and Router
- White goods (Washing, Cold, Aircon ,...)
- Digital multiplexers
- Power Meter SMPS
