ATF750C-15GM/883
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-CDIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF750C(L) |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NO |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 71MHz |
| Base Part Number | ATF750 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 750 |
| Screening Level | MIL-STD-883 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 5.08mm |
| Length | 32mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF750C-15GM/883 Overview
There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 24-CDIP (0.300, 7.62mm) package containing it.The device is programmed with 10 I/Os.Devices are programmed with terminations of [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.It is packaged in the way of Tube.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Through Holeholds the chip in place.In FPGA terms, it is a type of ATF750C(L)series FPGA.Additionally, this device is capable of displaying [0].The ATF750indicates that its related parts can be found.In digital circuits, there are 750gates, which act as a basic building block.High efficiency requires the supply voltage to be maintained at [0].In general, it is recommended to store data in [0].In this case, Through Holeis used to mount the electronic component.There are 24 pins on the device.A maximum supply voltage of 5.5Vis used in its operation.A minimum supply voltage of 4.5V is required for this device to operate.In order for the device to operate, it requires 5V power supplies.A frequency of 71MHzcan be achieved.There are 11 dedicated inputs used to detect the status of input signals.
ATF750C-15GM/883 Features
24-CDIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -55°C~125°C TA
24 pins
5V power supplies
ATF750C-15GM/883 Applications
There are a lot of Microchip Technology ATF750C-15GM/883 CPLDs applications.
- Interface bridging
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Code converters
- Boolean function generators
- Auxiliary Power Supply Isolated and Non-isolated
- PULSE WIDTH MODULATION (PWM)
- PLC analog input modules
- Software Configuration of Add-In Boards
- Cross-Matrix Switch
- Multiple Clock Source Selection
