banner_page

ATF750C-15SC

5V 1.27mm PMIC 24 Pin 71MHz 5V S


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF750C-15SC
  • Package: S
  • Datasheet: -
  • Stock: 987
  • Description: 5V 1.27mm PMIC 24 Pin 71MHz 5V S (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case S
Number of Pins 24
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 2
Number of Terminations 24
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature NO
HTS Code 8542.39.00.01
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Supply Voltage 5V
Terminal Pitch 1.27mm
Frequency 71MHz
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 24
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 10
Memory Type EEPROM
Propagation Delay 15 ns
Frequency (Max) 71MHz
Programmable Logic Type EE PLD
Number of Gates 750
Output Function MACROCELL
Number of Macro Cells 10
JTAG BST NO
Number of Dedicated Inputs 11
In-System Programmable NO
Height Seated (Max) 2.65mm
Length 15.4mm
Width 7.5mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ATF750C-15SC Overview


There are 10 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).Sis the package in which it resides.There are 10 I/Os programmed in it.It is programmed that device terminations will be 24 .This electrical part is wired with a terminal position of DUAL.The device is powered by a voltage of 5V volts.With 24pins programmed, the chip is ready to use.When using this device, NOis also available.A digital circuit can be constructed using 750gates.For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.The 24pins are designed into the board.There is a maximum supply voltage of 5.25V.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.There is 5V power supply available for it.This frequency is 71MHz.It is recommended that the operating temperature be greater than 0°C.A temperature less than 70°Cshould be used for operation.The input signals are detected by 11dedicated inputs.It is recommended that the maximal frequency be lower than 71MHz.It is possible to classify programmable logic as EE PLD.

ATF750C-15SC Features


S package
10 I/Os
24 pin count
24 pins
5V power supplies

ATF750C-15SC Applications


There are a lot of Atmel (Microchip Technology) ATF750C-15SC CPLDs applications.

  • LED Lighting systems
  • Parity generators
  • Storage Cards and Storage Racks
  • SUPERVISORY FUNCTION (LVD AND WATCHDOG)
  • Voltage level translation
  • TIMERS/COUNTERS
  • Timing control
  • Multiple Clock Source Selection
  • Cross-Matrix Switch
  • Portable digital devices

Write a review

Note: HTML is not translated!
    Bad           Good