ATF750C-7JX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF750C(L) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | NO |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Frequency | 142MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF750 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 750 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF750C-7JX Overview
This network has 10macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 28-LCC (J-Lead) package containing it.As you can see, this device has 10 I/O ports programmed into it.There are 28 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 5V volts.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tube.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.The chip should be mounted by Surface Mount.The FPGA belongs to the ATF750C(L) series.It is also characterized by NO.The ATF750shows its related parts.750gates are used to construct digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].It is mounted by Surface Mount.A total of 28pins are provided on this board.A maximum supply voltage of 5.25Vis used in its operation.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.Currently, it is powered by 5Vsources.There can be 142MHz frequency achieved.There are 11 dedicated inputs used to detect the status of input signals.
ATF750C-7JX Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~70°C TA
28 pins
5V power supplies
ATF750C-7JX Applications
There are a lot of Microchip Technology ATF750C-7JX CPLDs applications.
- Software-driven hardware configuration
- Programmable power management
- Software Configuration of Add-In Boards
- TIMERS/COUNTERS
- Wide Vin Industrial low power SMPS
- Protection relays
- Power up sequencing
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Boolean function generators
- High speed graphics processing
