ATF750CL-15JC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | J |
| Number of Pins | 28 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 71MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 71MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 750 |
| Number of Programmable I/O | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 11 |
| In-System Programmable | NO |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF750CL-15JC Overview
The mobile phone network has 10 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a J package.There are 10 I/Os programmed in it.The device is programmed with 28 terminations.This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 5V.This part is in the family [0].In this chip, the 28pins are programmed.If you use this device, you will also find [0].In digital circuits, 750gates serve as building blocks.In general, it is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 28 pins.It operates at a maximum supply voltage of 5.25V volts.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.There is 5V power supply available for it.A total of 20 Programmable I/Os are available.The frequency that can be achieved is 71MHz.Operating temperatures should be higher than 0°C.Temperatures should be lower than 70°C when operating.Input signals are detected by 11dedicated inputs.The maximum frequency should not exceed 71MHz.In programmable logic, a type of logic can be categorized as EE PLD.
ATF750CL-15JC Features
J package
10 I/Os
28 pin count
28 pins
5V power supplies
ATF750CL-15JC Applications
There are a lot of Atmel (Microchip Technology) ATF750CL-15JC CPLDs applications.
- Multiple Clock Source Selection
- Interface bridging
- USB Bus
- I/O expansion
- Battery operated portable devices
- TIMERS/COUNTERS
- Storage Cards and Storage Racks
- ROM patching
- Software Configuration of Add-In Boards
- Protection relays
