ATF750LVC-15PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 24 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Frequency (Max) | 71MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 11 |
| In-System Programmable | NO |
| Height Seated (Max) | 5.334mm |
| Length | 31.877mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF750LVC-15PI Overview
Currently, there are 10 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A PDIP package contains the item.As a result, it has 10 I/O ports programmed.24terminations have been programmed into the device.There is a DUALterminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.This part is part of the family [0].It is equipped with 24 pin count.If you use this device, you will also find [0].It is possible to construct digital circuits using 500gates, which are devices that serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].Data is stored using [0].A Through Holeis mounted on this electronic component.A total of 24pins are provided on this board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.A minimum supply voltage of 3V is required for this device to operate.It is recommended that the operating temperature be higher than -40°C.The operating temperature should be lower than 85°C.The status of input signals is detected by 11dedicated inputs.It is recommended that the maximum frequency be less than 71MHz.Programmable logic types are divided into EE PLD.
ATF750LVC-15PI Features
PDIP package
10 I/Os
24 pin count
24 pins
ATF750LVC-15PI Applications
There are a lot of Atmel (Microchip Technology) ATF750LVC-15PI CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Software-Driven Hardware Configuration
- Synchronous or asynchronous mode
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Multiple DIP Switch Replacement
- Battery operated portable devices
- PULSE WIDTH MODULATION (PWM)
- Random logic replacement
- Timing control
- D/T registers and latches
