ATMEGA128-16MUR
| Parameters | |
|---|---|
| Supply Current-Max | 19mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16 |
| EEPROM Size | 4K x 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | 2-Wire, CAN, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
ATMEGA128-16MUR Overview
As a result, it is available in the 64-VFQFN Exposed Pad package. The way of Surface Mount is used to mount it. It is available in the Tape & Reel (TR) package. A AVR core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. 53 I/Os can be found on it. It has a part number of ATMEGA128 that can be used to locate similar components. The terminals of this device are located at QUAD. Currently, it consists of 64 terminationals. The electrical component is part of the series AVR? ATmega. Using the 5V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 64 pins are used in its construction. Based on the Surface Mount method, it is mounted. This component is a part of Microcontrollers. A device with a memory size of 64kB can store programs and data. 19mA is the maximum supply current. A 5V source of power is being used to run it. It performs extremely well at a frequency of 16MHz. When 5V is employed, designers can fully utilize its adaptability and supply voltage. The number of timers and counters is 4. Using an oscillator type of Internal, it works.
ATMEGA128-16MUR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA128-16MUR Applications
There are a lot of Microchip Technology ATMEGA128-16MUR Microcontroller applications.
- Telephone sets
- Pacemakers (used to control abnormal heart rhythm)
- Hard drives
- Calculators
- Set-top boxes
- Oil and gas
- Air fryers
- Wastewater treatment
- Fire alarms
- Smartphone
