ATMEGA1280V-8AU
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA1280 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 86 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Address Bus Width | 8b |
| Density | 1 Mb |
| EEPROM Size | 4K x 8 |
| Number of ADC Channels | 16 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 14.1mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
ATMEGA1280V-8AU Overview
To save space, it is included in the 100-TQFP package. The way of mounting it is Surface Mount. It comes in the package?of a Tray. It is equipped with a AVR core processor. Maintain a temperature of -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 86 I/Os have been provided by the device. Based on its base part number of ATMEGA1280, other similarly-sized components can be found. At QUAD, its terminals are located. As far as terminations are concerned, there are 100 terminations present. The AVR? ATmega series includes this electrical component. The supply voltage of 3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed using 100 pins. Based on the Surface Mount method, it is mounted. Microcontrollers contains this component. In the device, there is a memory capacity of 128kB which may be used to store programs and data. Power is provided by a source of 2/5V. When working at a frequency of 8MHz it is able to achieve excellent efficiency. The number of timers and counters is 6. Normally, the supply voltage (Vsup) should remain above 2.7V. It works with an oscillator type Internal.
ATMEGA1280V-8AU Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA1280V-8AU Applications
There are a lot of Microchip Technology ATMEGA1280V-8AU Microcontroller applications.
- Fabric
- Oil and gas
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hearing aids
- Entertainment-radios, CD players, televisions
- Answering machines
- Copiers
- Aerospace navigation systems
- Smart instruments
- Safety -airbags, automatic braking system (ABS)
