ATMEGA1280V-8CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 8MHz |
| Base Part Number | ATMEGA1280 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 86 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 6 |
| EEPROM Size | 4K x 8 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 15 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 5 |
| Height | 800μm |
| Length | 9.1mm |
| Width | 9.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA1280V-8CU Overview
To save space, it is included in the 100-TFBGA package. Surface Mount is the way to mount it. In the package Tray, it is included. The device has a AVR core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. It has a number of 86I/Os. It has a base part number of ATMEGA1280 that can be used to find other components that are comparable. The terminals of this device are located at BOTTOM. Currently, it consists of 100 terminationals. This electrical component is part of the AVR? ATmega series. High efficiency is possible due to the 3V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 100 pins are used in its construction. During the mounting process, the device is mounted based on the Surface Mount method. In the subcategory of Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 128kB. This device works well at 8MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 6. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.7V. Internal is the oscillator type it uses.
ATMEGA1280V-8CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA1280V-8CU Applications
There are a lot of Microchip Technology ATMEGA1280V-8CU Microcontroller applications.
- Refrigerators
- X-ray
- Light sensing & controlling devices
- Entertainment products
- Instrument control
- Medical instruments chromatographs
- 3D printers
- Accu-check
- Projector
- Missile control
