ATMEGA1284-MUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | ATMEGA1284 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 4K x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA1284-MUR Overview
It is available in the 44-VFQFN Exposed Pad package for the benefit of saving space. Surface Mount is the way to mount it. In the package Tape & Reel (TR), it is included. The device runs in AVR core processor. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. A total of 32 I/Os are present. Based on its base part number of ATMEGA1284, other similarly-sized components can be found. The terminals of this device are located at QUAD. Currently, it consists of 44 terminationals. The AVR? ATmega series includes this electrical component. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. There are 44 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. In Microcontrollers, this component is included. The devices have a maximum memory size of 128kB that can be used to store programs and data. The maximum supply current is set at 12mA. It is powered by a 2/5V?source. At a frequency of 20MHz, it exhibits excellent efficiency. In total, there are 3 timers and counters. Normally, the supply voltage (Vsup) should remain above 1.8V. The oscillator type Internal is used to operate the device.
ATMEGA1284-MUR Features
44-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA1284-MUR Applications
There are a lot of Microchip Technology ATMEGA1284-MUR Microcontroller applications.
- Temperature sensing and controlling devices
- Industrial instrumentation devices
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Air fryers
- X-ray
- Fire detection & safety devices
- Virtual reality VR robots
- Sonography (Ultrasound imaging)
- DCS control intelligent sensor
- Industrial robot
