ATMEGA128L-8MN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 4V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Base Part Number | ATMEGA128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 5.5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 16 |
| EEPROM Size | 4K x 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA128L-8MN Overview
There is an option to purchase it in the 64-VFQFN Exposed Pad package, which saves space. This is mounted using the Surface Mount method. It comes in the package?of a Tray. A AVR core processor powers the device. Maintain a temperature of -40°C~105°C TA while working. Memory type FLASH is used for program memory. There are 53 I/Os on it. In order to find similar components, it has a base part number of ATMEGA128. The terminals of this device are set to QUAD. A 64 termination is contained within it. There are a number of electrical components in the AVR? ATmega series, including this one. Because of the 4V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 64 pins are used. The method of Surface Mount is used to mount it. The component is included in Microcontrollers. In order to store data and programs, the devices have a memory size of 128kB. Supply current cannot exceed 5.5mA. Power is provided by a source of 3/5V. This device works well at 8MHz frequency when it is operating at a high rate of efficiency. 4 timer/counters are present. Normal operation requires a supply voltage (Vsup) that is higher than 3V. Using an oscillator type of Internal, it works.
ATMEGA128L-8MN Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA128L-8MN Applications
There are a lot of Microchip Technology ATMEGA128L-8MN Microcontroller applications.
- Mice
- Paper shredders
- Walkie talkies
- PDAs, game consoles
- Temperature sensing and controlling devices
- X-ray
- Fabric
- Xbox
- Vacuum cleaners
- Robotic prosthetic limbs
