ATMEGA128RFA1-ZFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | TxRx + MCU |
| Additional Feature | IT ALSO OPERATES AT 3.3 V |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.4GHz |
| Base Part Number | ATMEGA128RFA1 |
| Qualification Status | Not Qualified |
| Power Supplies | 2/3.3V |
| Interface | I2C, SPI, USART |
| Memory Size | 128kB Flash 4kB EEPROM 16kB SRAM |
| Number of I/O | 38 |
| RAM Size | 4kB |
| Memory Type | FLASH |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Protocol | 6LoWPAN, Zigbee® |
| Core Architecture | AVR |
| Number of Programmable I/O | 38 |
| Power - Output | 3.5dBm |
| RF Family/Standard | 802.15.4 |
| Number of UART Channels | 1 |
| Data Rate (Max) | 2Mbps |
| Number of ADC Channels | 8 |
| Serial Interfaces | I2C, JTAG, SPI, USART |
| Current - Receiving | 12mA~12.5mA |
| Current - Transmitting | 8mA~14.5mA |
| Modulation | O-QPSK |
| Sensitivity (dBm) | -100 dBm |
| Height Seated (Max) | 0.9mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA128RFA1-ZFR Overview
On the board, there is also a 64-VFQFN Exposed Pad package that saves space.Surface Mount is used for RF transceiver's mounting.With transceiver RF's high efficiency, it appears as a TxRx + MCU.A high level of reliability is provided by using an advanced transceiver RF' packaging Cut Tape (CT).A transceiver RF circuit board with 64 pins is designed.Try searching for ATMEGA128RFA1 variants of the transceiver.A frequency of 2.4GHz is used as the basis for operation.
ATMEGA128RFA1-ZFR Features
64-VFQFN Exposed Pad package
Surface Mount for mounting
TxRx + MCU
Cut Tape (CT) is used
64 pins
Use ATMEGA128RFA1
ATMEGA128RFA1-ZFR Applications
There are a lot of Microchip Technology ATMEGA128RFA1-ZFR RF Transceiver ICs applications.
- Remote Control
- POS Terminals
- LED Lighting
- Location and Asset Tracking
- Thermostats
- Smart Meters
- HVAC
- Health and Fitness
- Health care
