ATMEGA162-16PU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | MATTE TIN |
| Additional Feature | ALSO OPERATES AT 2.7V MINIMUM SUPPLY |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 16MHz |
| Base Part Number | ATMEGA162 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | EBI/EMI, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | EBI/EMI, SPI, UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Address Bus Width | 8b |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Number of PWM Channels | 6 |
| Number of SPI Channels | 1 |
| Height | 4.445mm |
| Length | 52.58mm |
| Width | 13.97mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA162-16PU Overview
For space savings, it is available in the 40-DIP (0.600, 15.24mm) package. In this case, it is mounted using the method of Through Hole. It comes in the package?of a Tube. Device with AVR core processor issupported. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. 35 I/Os can be found on it. In order to find similar components, it has a base part number of ATMEGA162. The terminals of this device are located at DUAL. This circuit consists of 40 terminationals. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. Using the 5V supply voltage allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 40 pins are required to construct this device. It is mounted based on the method of Through Hole. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. A 3/5V source is used for powering it. At a frequency of 16MHz, it exhibits excellent efficiency. A total of 4 timers/counters have been set up. The property ALSO OPERATES AT 2.7V MINIMUM SUPPLY is also present in it. An oscillator of type Internal is used.
ATMEGA162-16PU Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATMEGA162-16PU Applications
There are a lot of Microchip Technology ATMEGA162-16PU Microcontroller applications.
- Heart rate monitors
- Oil and gas
- Current meter
- Television
- Digital set-top boxes
- Automatic staplers
- Security systems
- Radio
- Scanners
- Electrocardiogram (EKG)
