ATMEGA162V-8PU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 8MHz |
| Base Part Number | ATMEGA162 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | EBI/EMI, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | EBI/EMI, SPI, UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Number of PWM Channels | 6 |
| Number of SPI Channels | 1 |
| Height | 4.826mm |
| Length | 52.58mm |
| Width | 13.97mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA162V-8PU Overview
Due to its space-saving qualities, it is available in the 40-DIP (0.600, 15.24mm) package. Through Hole is used for mounting. It comes in the package?of a Tube. There is a AVR as core processor in this device. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. The device has 35 I/Os. Based on its base part number of ATMEGA162, other similarly-sized components can be found. The terminals are positioned at DUAL. It has 40 terminationals. The electrical component is part of the series AVR? ATmega. Because of the 3V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 40 pins are used to construct it. Mounting is performed in accordance with Through Hole. It is one of the components included in Microcontrollers. The devices have a memory size of 16kB that can be used to store programs and data. It is powered by a 2/5V?source. The system is highly efficient when working at a frequency of 8MHz. In total, there are 4 timers and counters. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.7V. The oscillator type Internal is used to operate the device.
ATMEGA162V-8PU Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATMEGA162V-8PU Applications
There are a lot of Microchip Technology ATMEGA162V-8PU Microcontroller applications.
- Process control devices
- Missile control
- ECG machine
- Guidance-GPS
- Fire detection & safety devices
- Copiers
- Graphic terminals
- Hard drives
- Current meter
- Torpedo guidance
