ATMEGA164PA-CUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 49-VFBGA |
| Number of Pins | 49 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | AVR® ATmega |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 49 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA164PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA164PA-CUR Overview
There is an option to purchase it in the 49-VFBGA package, which saves space. The way of Surface Mount is used to mount it. In the package Tape & Reel (TR), it is included. With a processor of AVR cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. Its type of program memory is FLASH. It has a number of 32I/Os. It has a base part number of ATMEGA164PA that can be used to find other components that are comparable. At BOTTOM, it has its terminals. In this case, there are 49 terminationals. In the AVR? ATmega series, this electrical component is found. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 49 pins are required to construct this device. A method of mounting is used, which is Surface Mount. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 16kB that can be used to store programs and data. The maximum supply current is 9mA. A 2/5V power source powers it. This device achieves excellent efficiency at frequencies of 20MHz. 3 timer/counters are present. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 1.8V. The oscillator type Internal is used to operate the device.
ATMEGA164PA-CUR Features
49-VFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA164PA-CUR Applications
There are a lot of Microchip Technology ATMEGA164PA-CUR Microcontroller applications.
- Ipod
- Set-top boxes
- Removable disks
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Air fryers
- Calculators
- Telephone sets
- Teletext terminals
- Fax machines
- Smart instruments
