ATMEGA164PV-10MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 10MHz |
| Base Part Number | ATMEGA164P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1mm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA164PV-10MU Overview
As a result, it is available in the 44-VFQFN Exposed Pad package. Surface Mount is the way to mount it. There is a Tray package available for it. Device with AVR core processor issupported. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 32 I/Os are present on the device. Other components that are comparable to it have the base part number ATMEGA164P. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 44 terminations present. In the AVR? ATmega series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. There are 44 pins used in the construction of this device. This mount is done in accordance with the method of Surface Mount. Subcategory Microcontrollers includes this component. Data and programs can be stored on the devices with a memory size of 16kB. The maximum supply current is 9mA. Power comes from a source of 2/5V. This device achieves excellent efficiency at frequencies of 10MHz. A total of 3 timers/counters are present. During normal operation, the supply voltage (Vsup) should be kept above 2.7V. Using oscillator type Internal makes it work.
ATMEGA164PV-10MU Features
44-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA164PV-10MU Applications
There are a lot of Microchip Technology ATMEGA164PV-10MU Microcontroller applications.
- Copiers
- Printers
- Smoke alarms
- Entertainment-radios, CD players, televisions
- Hearing aids
- Process control devices
- Set-top boxes
- Broadband technology, video and voice processing
- Ipad
- Wastewater treatment
