ATMEGA165A-MUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Base Part Number | ATMEGA165A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 9.5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
ATMEGA165A-MUR Overview
Due to its space-saving qualities, it is available in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. This item can be found in package Tape & Reel (TR). AVR core processor is present on the device. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 54 I/Os have been provided by the device. A component with the same part number as ATMEGA165A can be compared to other similar components. QUAD is the position of its terminals on the board. A 64 termination is contained within it. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. By using a 5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 64 pins are used to construct it. It is mounted based on the method of Surface Mount. It belongs to the subcategory Microcontrollers. A device with a memory size of 16kB can store programs and data. It is important to note that the maximum supply current is 9.5mA. There is 2/5V power source in this device. This device achieves excellent efficiency at frequencies of 16MHz. 3 timers/counters are in use. There is also the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ. A supply voltage (Vsup) above 4.5V is necessary for normal operation. Internal is the oscillator type it uses.
ATMEGA165A-MUR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA165A-MUR Applications
There are a lot of Microchip Technology ATMEGA165A-MUR Microcontroller applications.
- Volt meter
- Dialysis machines (performs function of liver)
- Missile control
- Routers
- Dishwashers
- Mobile computers
- Set-top boxes
- Radio
- Answering machines
- Accu-check
