ATMEGA165P-16MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA165P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 9.5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA165P-16MU Overview
A space-saving advantage is that it is included in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. It comes in the package?of a Tray. Device with AVR core processor issupported. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. 54 I/Os can be found on it. Based on the ATMEGA165P base part number, it can be compared with other components. QUAD is the position of its terminals on the board. Currently, it consists of 64 terminationals. This electrical component is part of the AVR? ATmega series. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 64 pins are used to construct it. According to Surface Mount, it is mounted. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 16kB that can be used to store programs and data. The maximum supply current is set at 9.5mA. This device works well at 16MHz frequency when it is operating at a high rate of efficiency. There are 3 timers/counters. In addition, it is also capable of having the property ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ. Vsup should be kept above 4.5V for normal operation. Using oscillator type Internal makes it work.
ATMEGA165P-16MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA165P-16MU Applications
There are a lot of Microchip Technology ATMEGA165P-16MU Microcontroller applications.
- Hard drives
- Robots
- Home appliances
- Telephone sets
- Robotic prosthetic limbs
- Instrument control
- Data acquisition and control
- Speed meter
- Calculator
- Entertainment products
