ATMEGA165PV-8MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA165P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 1K x 8 |
| Memory Type | EEPROM, FLASH |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 9.5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA165PV-8MU Overview
It is available in the 64-VFQFN Exposed Pad package for the benefit of saving space. Mounted using Surface Mount. It is available in the Tray package. The device has a AVR core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 54 I/Os on it. In order to find similar components, it has a base part number of ATMEGA165P. QUAD is the location of its terminals. 64 terminationals are present. The AVR? ATmega series contains this electrical component. As a result of the 3V supply voltage, high efficiency is possible. Storage of data is performed using memory type EEPROM, FLASH. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 64 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. It falls under the category of Microcontrollers. Memory size for the devices is 16kB, which can be used to store programs and data. 9.5mA is the maximum supply current. A 2/5V source of power is being used to run it. It is highly efficient when it works at a frequency of 8MHz. In total, there are 3 timers and counters. During normal operation, the supply voltage (Vsup) should be kept above 2.7V. Using a Internal oscillator type, it works well.
ATMEGA165PV-8MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA165PV-8MU Applications
There are a lot of Microchip Technology ATMEGA165PV-8MU Microcontroller applications.
- Fax machines
- Process control devices
- Home video and audio
- Speed meter
- Nintendo
- Fax machines
- Smart instruments
- Fire detection & safety devices
- Traditional industrial transformation
- Washing machine
