ATMEGA168A-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA168A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | 2-Wire, I2C, SPI, Serial, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 512 x 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 8 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 2 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA168A-AU Overview
It is available in the 32-TQFP package for the benefit of saving space. This is mounted using the Surface Mount method. A package of Tray contains it. It is equipped with a AVR core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 23 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number ATMEGA168A. This device has terminals at QUAD. It consists of 32 terminationals. The electrical component is part of the series AVR? ATmega. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 32 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. In Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 16kB. A 2/5V power source powers it. The system is highly efficient when working at a frequency of 20MHz. 3 timer/counters are present. Normal operation requires a supply voltage (Vsup) above 4.5V. Using an oscillator type Internal, it operates.
ATMEGA168A-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA168A-AU Applications
There are a lot of Microchip Technology ATMEGA168A-AU Microcontroller applications.
- Firewalls
- Oil and gas
- Electromechanical control
- Washing machines
- Mobile computers
- Digital set-top boxes
- Air fryers
- Pacemakers (used to control abnormal heart rhythm)
- Wastewater treatment
- Ipad
