ATMEGA168PA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA168PA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 8 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 2 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA168PA-AU Overview
As a result, it is available in the 32-TQFP package. The way of Surface Mount is used to mount it. It comes in a Tray package. The device runs in AVR core processor. During work, the temperature should remain at -40°C~85°C TA. It has a type of program memory of FLASH. A total of 23 I/Os are available on this device. Based on its base part number of ATMEGA168PA, other similarly-sized components can be found. A QUAD position is assigned to its terminals. In this case, there are 32 terminationals. AVR? ATmega is the series number of this electrical component. It is possible to achieve high efficiency with a 5V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. There are 32 pins used in the construction of this device. According to Surface Mount, it is mounted. In Microcontrollers, this component is included. In the device, there is a memory capacity of 16kB which may be used to store programs and data. In this case, 9mA represents the maximum current supply. There is 2/5V power source in this device. It is highly efficient when it works at a frequency of 20MHz. 3 counters/timers are currently active. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. Using a Internal oscillator type, it works well.
ATMEGA168PA-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA168PA-AU Applications
There are a lot of Microchip Technology ATMEGA168PA-AU Microcontroller applications.
- Light sensing & controlling devices
- Industrial instrumentation devices
- DCS control intelligent sensor
- Electronic jamming systems
- Computer/laptop
- Smoke alarms
- Virtual reality VR robots
- Set-top boxes
- Multi-meter
- Oscilloscopes
