ATMEGA168PA-CCU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-UFBGA |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 5.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | ATMEGA168PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 0.6mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA168PA-CCU Overview
A space-saving advantage is that it is included in the 32-UFBGA package. The way of Surface Mount is used to mount it. In the package Tray, it is included. With a processor of AVR cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. Its type of program memory is FLASH. A total of 23 I/Os are present. It has a part number of ATMEGA168PA that can be used to locate similar components. This device has terminals at BOTTOM. 32 terminationals are present. It is a member of the AVR? ATmega series of electrical components. By using a 5.5V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 32 pins are required to construct this device. According to Surface Mount, it is mounted. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 16kB which may be used to store programs and data. A maximum supply current of 9mA is set. Powered by a 2/5V source. Using a frequency of 20MHz, it is very efficient. There are currently 3 timers/counters set up on the system. In addition, it is also capable of having the property ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ. A supply voltage (Vsup) above 4.5V is necessary for normal operation. Using an oscillator type Internal, it operates.
ATMEGA168PA-CCU Features
32-UFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA168PA-CCU Applications
There are a lot of Microchip Technology ATMEGA168PA-CCU Microcontroller applications.
- Petrochemical
- Keyboards
- Dryers
- DVD\DV\MP3 players
- Fabric
- Data acquisition and control
- Nintendo
- Projector
- Projectors
- Routers
