ATMEGA168PA-MN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA168PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 512 x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA168PA-MN Overview
It is available in the 32-VFQFN Exposed Pad package for the benefit of saving space. Surface Mount is the way to mount it. Package Tray contains it. There is a AVR as core processor in this device. Work should be done at -40°C~105°C TA. Its type of program memory is FLASH. There are 23 I/Os on it. In order to find similar components, it has a base part number of ATMEGA168PA. QUAD is the location of its terminals. 32 terminationals are present. It is a member of the AVR? ATmega series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. The structure is constructed from 32 pins. It falls under the category of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 16kB. The maximum supply current is set at 9mA. A 2/5V power source powers it. It is highly efficient when it works at a frequency of 20MHz. The number of timers and counters is 3. The property ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ is also present in it. Vsup should be kept above 4.5V for normal operation. Using an oscillator type of Internal, it works.
ATMEGA168PA-MN Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA168PA-MN Applications
There are a lot of Microchip Technology ATMEGA168PA-MN Microcontroller applications.
- Projectors
- Embedded gateways
- Heart rate monitors
- Sonography (Ultrasound imaging)
- Answering machines
- Calculators
- Light sensing & controlling devices
- Playstation
- Automatic control
- Microwave ovens
