ATMEGA168PV-10AU
| Parameters | |
|---|---|
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA168P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
ATMEGA168PV-10AU Overview
To save space, it is included in the 32-TQFP package. A Surface Mount mounting method is used. Package Tray contains it. A core processor of AVR is present in the device. Maintain a temperature of -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. 23 I/Os have been provided by the device. Other components that are comparable to it have the base part number ATMEGA168P. At QUAD, its terminals are located. 32 terminationals are present. The AVR? ATmega series includes this electrical component. The supply voltage of 4.5V allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 32 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 16kB. Supply current cannot exceed 9mA. The system is highly efficient when working at a frequency of 10MHz. 3 timer/counters are present. Using an oscillator type of Internal, it works.
ATMEGA168PV-10AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA168PV-10AU Applications
There are a lot of Microchip Technology ATMEGA168PV-10AU Microcontroller applications.
- Calculator
- Microwave ovens
- Laminators
- Automatic control
- Microwave ovens
- Fire detection & safety devices
- Entertainment products
- Projectors
- Hand-held metering systems
- Firewalls
