ATMEGA168PV-10AUR
| Parameters | |
|---|---|
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA168P |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART |
ATMEGA168PV-10AUR Overview
It is available in the 32-TQFP package for the benefit of saving space. Mounted using Surface Mount. Tape & Reel (TR) is the package that contains it. The device runs in AVR core processor. Maintain a temperature of -40°C~85°C TA while working. It has a type of program memory of FLASH. A total of 23 I/Os are present. It has a part number of ATMEGA168P that can be used to locate similar components. A QUAD position is assigned to its terminals. It has 32 terminationals. It is a member of the AVR? ATmega series of electrical components. High efficiency is possible due to the 4.5V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. There are 32 pins used in the construction of this device. It is mounted based on the method of Surface Mount. Microcontrollers contains this component. It is possible to store programs and data on the devices, as they have a memory size of 16kB. Supply current cannot exceed 9mA. A 2/5V source of power is being used to run it. It is highly efficient when it works at a frequency of 10MHz. There are 3 timers/counters. Moreover, it also has the property of ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4 MHZ. Normal operation requires a supply voltage (Vsup) that is higher than 2.7V. An oscillator of type Internal is used.
ATMEGA168PV-10AUR Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA168PV-10AUR Applications
There are a lot of Microchip Technology ATMEGA168PV-10AUR Microcontroller applications.
- Toasters
- DCS control intelligent sensor
- Industrial instrumentation devices
- Leakage current tester
- Calculators
- Automatic control
- Wastewater treatment
- Dryers
- Robotic prosthetic limbs
- Torpedo guidance
