ATMEGA168PV-10PU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | ATMEGA168P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 4.572mm |
| Length | 34.8mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATMEGA168PV-10PU Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. It is mounted using the way of Through Hole. It comes in a Tube package. The device has a AVR core processor. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 23 I/Os on it. It has a part number of ATMEGA168P that can be used to locate similar components. DUAL is the location of its terminals. This circuit consists of 28 terminationals. In the AVR? ATmega series, this electrical component is found. As a result of the 4.5V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 28 pins are required to construct this device. The mounting of this device is carried out following the method of Through Hole. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 16kB. The maximum supply current is set at 9mA. Power is provided by a 2/5V source. It performs extremely well at a frequency of 10MHz. 3 timers/counters are in use. Normal operation requires a supply voltage (Vsup) that is higher than 2.7V. Internal is the oscillator type it uses.
ATMEGA168PV-10PU Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATMEGA168PV-10PU Applications
There are a lot of Microchip Technology ATMEGA168PV-10PU Microcontroller applications.
- Robots
- Sonography (Ultrasound imaging)
- 3D printers
- Air fryers
- Information appliances (networking of household appliances)
- Hearing aids
- Medical instruments chromatographs
- Missile control
- Oscilloscopes
- Washing machine
