ATMEGA169PA-MCH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VQFN Dual Rows, Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 16MHz |
| Base Part Number | ATMEGA169PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 9.5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA169PA-MCH Overview
There is a 64-VQFN Dual Rows, Exposed Pad package available to save space. Using Surface Mount, it is mounted. Tray is the package that contains it. It is equipped with a AVR core processor. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 54 I/Os on it. In order to find similar components, it has a base part number of ATMEGA169PA. QUAD is the position of its terminals on the board. 64 terminationals are present. There are a number of electrical components in the AVR? ATmega series, including this one. The 5V supply voltage enables high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There are 64 pins used in the construction of this device. Based on the Surface Mount method, it is mounted. In the subcategory of Microcontrollers, this component is included. Using the devices' 16kB memory size, you can store programs and data. Supply current cannot exceed 9.5mA. Powered by a 2/5V source. This device works well at 16MHz frequency when it is operating at a high rate of efficiency. A total of 3 timers/counters have been set up. It has the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ as well. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. Using a Internal oscillator type, it works well.
ATMEGA169PA-MCH Features
64-VQFN Dual Rows, Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA169PA-MCH Applications
There are a lot of Microchip Technology ATMEGA169PA-MCH Microcontroller applications.
- X-ray
- Set-top boxes
- Digital TVs
- Magnetic resonance imaging (MRI)
- Television
- Projector
- Kindle
- Process control devices
- DDC control
- Oil and gas
