ATMEGA16L-8AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 16KB 8K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 128 kb |
| EEPROM Size | 512 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 10.1mm |
| Width | 10.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA16L-8AU Overview
As a result, it is available in the 44-TQFP package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tray. The device has a AVR core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is its program memory type. A total of 32 I/Os are available on this device. It has a part number of ATMEGA16 that can be used to locate similar components. At QUAD, it has its terminals. A 44 termination is contained within it. The AVR? ATmega series includes this electrical component. Using the 3V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 44 pins are required to construct this device. The method of Surface Mount is used to mount it. This component is a part of Microcontrollers. A device with a memory size of 16kB can store programs and data. Supply current cannot exceed 5mA. It performs extremely well at a frequency of 8MHz. A total of 3 timers/counters have been set up. Normally, the supply voltage (Vsup) should remain above 2.7V. An oscillator type Internal is required for it to work.
ATMEGA16L-8AU Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA16L-8AU Applications
There are a lot of Microchip Technology ATMEGA16L-8AU Microcontroller applications.
- Industrial instrumentation devices
- Telephone sets
- Process control devices
- Broadband technology, video and voice processing
- PDAs, game consoles
- Mice
- Fax machines
- Robots
- DVD\DV\MP3 players
- Routers
