ATMEGA2560-16CUR
| Parameters | |
|---|---|
| Address Bus Width | 16 |
| ROM (words) | 131072 |
| EEPROM Size | 4K x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | AVR® ATmega |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | TIN SILVER COPPER |
| Additional Feature | ALSO OPERATES AT 2.7V MINIMUM SUPPLY AT 8 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA2560 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 86 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 256KB 128K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 14mA |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 6 |
ATMEGA2560-16CUR Overview
As a result, it is available in the 100-TFBGA package. The way of mounting it is Surface Mount. It is available in the Tape & Reel (TR) package. A AVR core processor powers the device. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. There are 86 I/Os on it. To find comparable components, use the ATMEGA2560 base part number. The terminals of this device are set to BOTTOM. It has 100 terminationals. The AVR? ATmega series contains this electrical component. The 5V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. There are 100 pins used in the construction of this device. The method of Surface Mount is used to mount it. In Microcontrollers, this component is included. The devices have a memory size of 256kB that can be used to store programs and data. It is important to note that the maximum supply current is 14mA. A 5V power source powers it. It performs extremely well at a frequency of 16MHz. While employing 5V, designers can maximize its supply voltage adaptability. A total of 6 timers/counters are present. Moreover, it possesses the property of ALSO OPERATES AT 2.7V MINIMUM SUPPLY AT 8 MHZ. Using a Internal oscillator type, it works well.
ATMEGA2560-16CUR Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA2560-16CUR Applications
There are a lot of Microchip Technology ATMEGA2560-16CUR Microcontroller applications.
- Gas monitoring systems
- Security systems
- Keyboards
- Microwave ovens
- Dryers
- Copiers
- Traditional industrial transformation
- Medical instruments chromatographs
- Temperature sensing and controlling devices
- Routers
