ATMEGA2560V-8AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Manufacturer Package Identifier | 100A (REV C) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2001 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA2560 |
| Number of Outputs | 86 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 86 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 256KB 128K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Address Bus Width | 8b |
| Density | 2 Mb |
| EEPROM Size | 4K x 8 |
| Number of UART Channels | 4 |
| Number of ADC Channels | 16 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 14.1mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA2560V-8AU Overview
There is an option to purchase it in the 100-TQFP package, which saves space. Mounted using Surface Mount. It comes in a Tray package. The device runs in AVR core processor. Working at -40°C~85°C TA temperature is recommended. Memory type FLASH is used for program memory. 86 I/Os can be found on it. To find equivalent components, use its ATMEGA2560 base part number. A QUAD position is assigned to its terminals. It consists of 100 terminationals. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. Because the supply voltage is 3V, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 100 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. The component is included in Microcontrollers. Using the devices' 256kB memory size, you can store programs and data. A 2/5V source of power is being used to run it. The system is highly efficient when working at a frequency of 8MHz. There are 6 timers/counters. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.7V. It works with an oscillator type Internal.
ATMEGA2560V-8AU Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA2560V-8AU Applications
There are a lot of Microchip Technology ATMEGA2560V-8AU Microcontroller applications.
- Firewalls
- Christmas lights
- DCS control intelligent sensor
- Kindle
- Virtual reality VR robots
- Digital TVs
- Current meter
- Glucose monitoring systems (for Type 1 Diabetes)
- Digital set-top boxes
- Magnetic resonance imaging (MRI)
