ATMEGA324A-CUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 49-VFBGA |
| Number of Pins | 49 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 49 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Base Part Number | ATMEGA324A |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 2K x 8 |
| Memory Type | FLASH, OTP |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA324A-CUR Overview
To save space, it is included in the 49-VFBGA package. A Surface Mount mounting method is used. Package Tape & Reel (TR) contains it. With a processor of AVR cores, the device is powered. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. 32 I/Os are present on the device. Based on the ATMEGA324A base part number, it can be compared with other components. The terminals of this device are located at BOTTOM. It consists of 49 terminationals. The AVR? ATmega series contains this electrical component. In data storage, FLASH, OTP is used as the memory type. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 49 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. Microcontrollers contains this component. Data and programs may be stored on the devices which have a memory size of 1.8kB. Supply current is maximum at 12mA. It is powered by a 2/5V?source. The system is highly efficient when working at a frequency of 20MHz. It appears that there are 3 timers/counters in use. Normal operation requires a supply voltage (Vsup) that is higher than 1.8V. An oscillator type Internal is required for it to work.
ATMEGA324A-CUR Features
49-VFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA324A-CUR Applications
There are a lot of Microchip Technology ATMEGA324A-CUR Microcontroller applications.
- Security systems
- Christmas lights
- Air fryers
- Computed Tomography (CT scan)
- Food and beverage
- Speed meter
- Automatic staplers
- Temperature sensing and controlling devices
- Smoke alarms
- Light sensing & controlling devices
