ATMEGA325PV-10MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 2V |
| Terminal Pitch | 0.5mm |
| Frequency | 10MHz |
| Base Part Number | ATMEGA325P |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| EEPROM Size | 1K x 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA325PV-10MU Overview
For the purpose of saving space, it is available in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. This item can be found in package Tray. AVR core processor is present on the device. Maintain a temperature of -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. 54 I/Os are present on the device. It has a base part number of ATMEGA325P that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. It has 64 terminationals. In the AVR? ATmega series, this electrical component is found. The supply voltage of 2V allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The structure is composed of 64 pins. It is mounted based on the method of Surface Mount. It falls under the category of Microcontrollers. The devices have a maximum memory size of 32kB that can be used to store programs and data. Supply current is maximum at 12mA. There is 2/5V power source in this device. The system is highly efficient when working at a frequency of 10MHz. 3 timers/counters are in use. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 1.8V. Internal is the oscillator type it uses.
ATMEGA325PV-10MU Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA325PV-10MU Applications
There are a lot of Microchip Technology ATMEGA325PV-10MU Microcontroller applications.
- Copiers
- Teletext terminals
- Fire detection & safety devices
- Torpedo guidance
- Microwave ovens
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Telephone sets
- Hearing aids
- Dishwashers
- Playstation
