ATMEGA329PV-10AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA329P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 1K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 14.1mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA329PV-10AU Overview
There is a 64-TQFP package available to save space. Surface Mount is used for mounting. It is available in the Tray package. AVR core processor is present on the device. During work, the temperature should remain at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 54 I/Os on the board. A comparable component can be found by using the base part number ATMEGA329P. A QUAD position is assigned to its terminals. 64 terminations are present in it. The AVR? ATmega series contains this electrical component. Because the supply voltage is 3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 64 pins. This mount is done in accordance with the method of Surface Mount. In Microcontrollers, this component is included. Using the devices' 32kB memory size, you can store programs and data. It is powered by a 2/5V?source. When working at a frequency of 10MHz it is able to achieve excellent efficiency. It appears that there are 3 timers/counters in use. Normally, the supply voltage (Vsup) should remain above 2.7V. There is an oscillator type Internal used in this circuit.
ATMEGA329PV-10AU Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA329PV-10AU Applications
There are a lot of Microchip Technology ATMEGA329PV-10AU Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Automatic staplers
- Heater/Fan
- Process control devices
- Fax machines
- Vacuum cleaners
- Ipad
- Aerospace navigation systems
- Coffee machines
- Blenders
