ATMEGA32A-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Base Part Number | ATMEGA32A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 256 kb |
| EEPROM Size | 1K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATMEGA32A-MU Overview
There is an option to purchase it in the 44-VFQFN Exposed Pad package, which saves space. Using Surface Mount, it is mounted. There is a Tray package available for it. It is equipped with a AVR core processor. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 32 I/Os are available on this device. In order to find similar components, it has a base part number of ATMEGA32A. The position of the device is QUAD at terminal. As far as terminations are concerned, there are 44 terminations present. This electrical component is part of the AVR? ATmega series. The 5V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 44 pins. It is mounted based on the method of Surface Mount. It is one of the components included in Microcontrollers. Using the devices' 32kB memory size, you can store programs and data. It performs extremely well at a frequency of 16MHz. It appears that there are 3 timers/counters in use. Internal is the oscillator type it uses.
ATMEGA32A-MU Features
44-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA32A-MU Applications
There are a lot of Microchip Technology ATMEGA32A-MU Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Auto-breaking system
- Dryers
- Home appliances
- Toys
- Firewalls
- Accu-check
- Speed meter
- Air fryers
- Equipment control
