ATMEGA32L-8MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA32 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 2K x 8 |
| Memory Type | EEPROM, FLASH |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 5mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 256 kb |
| EEPROM Size | 1K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1mm |
| Length | 7.1mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA32L-8MU Overview
As a result, it is available in the 44-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. You can find it in the package of Tray. It is equipped with a AVR core processor. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. It has a number of 32I/Os. A comparable component can be found by using the base part number ATMEGA32. The terminals of this device are located at QUAD. It consists of 44 terminationals. AVR? ATmega is the series number of this electrical component. The 3V supply voltage enables high efficiency. Memory type EEPROM, FLASH is used for data storage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 44 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. In Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 32kB. 5mA is the maximum supply current. It is highly efficient when it works at a frequency of 8MHz. A total of 3 timers/counters have been set up. Normally, the supply voltage (Vsup) should remain above 2.7V. There is an oscillator type Internal used in this circuit.
ATMEGA32L-8MU Features
44-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA32L-8MU Applications
There are a lot of Microchip Technology ATMEGA32L-8MU Microcontroller applications.
- Entertainment products
- Fire alarms
- Medical instruments chromatographs
- Heater/Fan
- Security systems
- Nintendo
- Laminators
- Temperature sensing and controlling devices
- DCS control intelligent sensor
- Oil and gas
