ATMEGA32M1-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 16MHz |
| Base Part Number | ATMEGA32M1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | CAN, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 27 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | CANbus, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 2 |
| ROM (words) | 16384 |
| EEPROM Size | 1K x 8 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
ATMEGA32M1-MU Overview
It is available in the 32-VFQFN Exposed Pad package for the benefit of saving space. The way of mounting it is Surface Mount. There is a Tray package available for it. With a processor of AVR cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 27I/Os. It has a base part number of ATMEGA32M1 that can be used to find other components that are comparable. QUAD is the location of its terminals. A 32 termination is contained within it. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. As a result of the 5V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 32 pins are used to construct it. According to Surface Mount, it is mounted. The component is included in Microcontrollers. In order to store data and programs, the devices have a memory size of 32kB. Powered by a 3/5V source. The system is highly efficient when working at a frequency of 16MHz. A total of 2 timers/counters have been set up. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. Internal is the oscillator type it uses.
ATMEGA32M1-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA32M1-MU Applications
There are a lot of Microchip Technology ATMEGA32M1-MU Microcontroller applications.
- DDC control
- Leakage current tester
- Glucose monitoring systems (for Type 1 Diabetes)
- Smart instruments
- Security systems
- Graphic terminals
- Laminators
- Dryers
- Communication-bluetooth, Wi-Fi, radio
- Calculators
