ATMEGA48PA-ANR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA48PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA48PA-ANR Overview
There is a 32-TQFP package available to save space. Surface Mount is used for mounting. It comes in the package?of a Tape & Reel (TR). A AVR core processor powers the device. During work, the temperature should remain at -40°C~105°C TA. FLASH has been assigned to it as a program memory. 23 I/Os can be found on it. It has a base part number of ATMEGA48PA that can be used to find other components that are comparable. The position of the device is QUAD at terminal. 32 terminationals are present. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 32 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. In the subcategory of Microcontrollers, this component is included. In order to store data and programs, the devices have a memory size of 4kB. Supply current cannot exceed 9mA. There is a source of power of 2/5V that powers this device. At a frequency of 20MHz, it can achieve excellent efficiency. A total of 3 timers/counters are present. There is also the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Using an oscillator type of Internal, it works.
ATMEGA48PA-ANR Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA48PA-ANR Applications
There are a lot of Microchip Technology ATMEGA48PA-ANR Microcontroller applications.
- DCS control intelligent sensor
- Copiers
- Current meter
- Home video and audio
- Speed meter
- Industrial instrumentation devices
- Teletext terminals
- X-ray
- Keyboards
- Industrial instrumentation devices
