ATMEGA48PA-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA48PA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 32 kb |
| EEPROM Size | 256 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA48PA-AU Overview
It is available in the 32-TQFP package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. There is a Tray package available for it. AVR core processor is present on the device. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 23 I/Os are present on the device. It has a part number of ATMEGA48PA that can be used to locate similar components. QUAD is the location of its terminals. A 32 termination is contained within it. In the AVR? ATmega series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 32 pins are required to construct this device. According to Surface Mount, it is mounted. In the subcategory of Microcontrollers, this component is included. Using the devices' 4kB memory size, you can store programs and data. In this case, 9mA represents the maximum current supply. It is powered by a 2/5V?source. The system is highly efficient when working at a frequency of 20MHz. There are 3 timers/counters. Vsup should be kept above 4.5V for normal operation. Using an oscillator type Internal, it operates.
ATMEGA48PA-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA48PA-AU Applications
There are a lot of Microchip Technology ATMEGA48PA-AU Microcontroller applications.
- Graphic terminals
- Auto-breaking system
- Television
- Fabric
- Fax machines
- Missile control
- Safety -airbags, automatic braking system (ABS)
- Fax machines
- Digital TVs
- Dialysis machines (performs function of liver)
