ATMEGA48PA-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA48PA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 32 kb |
| EEPROM Size | 256 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 880μm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA48PA-MU Overview
For space savings, it is available in the 32-VFQFN Exposed Pad package. Surface Mount is the way to mount it. Package Tray contains it. The device has a AVR core processor. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. 23 I/Os can be found on it. A component with the same part number as ATMEGA48PA can be compared to other similar components. The terminals are positioned at QUAD. This circuit consists of 32 terminationals. The AVR? ATmega series includes this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A number of 32 pins are used to construct it. According to Surface Mount, it is mounted. In the subcategory of Microcontrollers, this component is included. Using the devices' 4kB memory size, you can store programs and data. The maximum supply current is 9mA. Power comes from a source of 2/5V. When working at a frequency of 20MHz it is able to achieve excellent efficiency. 3 timer/counters are present. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. Internal is the oscillator type it uses.
ATMEGA48PA-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA48PA-MU Applications
There are a lot of Microchip Technology ATMEGA48PA-MU Microcontroller applications.
- DVD\DV\MP3 players
- Traditional industrial transformation
- Laminators
- Process control devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Instrument control
- Removable disks
- Oscilloscopes
- Missile control
- DCS control intelligent sensor
