ATMEGA48PA-PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ATMEGA48PA |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 6x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| Height Seated (Max) | 4.5724mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA48PA-PN Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. It comes in a Tube package. A core processor of AVR is present in the device. Working at -40°C~105°C TA temperature is recommended. FLASH is its program memory type. 23 I/Os are present on the device. In order to find similar components, it has a base part number of ATMEGA48PA. At DUAL, it has its terminals. A 28 termination is contained within it. The electrical component is part of the series AVR? ATmega. High efficiency is possible due to the 5V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. This mount is done in accordance with the method of Through Hole. This is a component included in Microcontrollers. In order to store data and programs, the devices have a memory size of 4kB. Supply current cannot exceed 9mA. Power is provided by a source of 2/5V. Working at a frequency of 20MHz results in excellent efficiency. There are currently 3 timers/counters set up on the system. Moreover, it also has the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 10 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ. Vsup should be kept above 4.5V for normal operation. There is an oscillator type Internal used in this circuit.
ATMEGA48PA-PN Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATMEGA48PA-PN Applications
There are a lot of Microchip Technology ATMEGA48PA-PN Microcontroller applications.
- Wastewater treatment
- Process control devices
- Playstation
- Communication-bluetooth, Wi-Fi, radio
- Computer/laptop
- Hard drives
- Automatic control
- Electromechanical control
- Toys
- Hand-held metering systems
