ATMEGA48PB-MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATMEGA48PB |
| Operating Supply Voltage | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 27 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 5.1mm |
| Width | 5.1mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA48PB-MU Overview
It is available in the 32-VFQFN Exposed Pad package for the benefit of saving space. It is mounted using the way of Surface Mount. Tray is the package that contains it. A AVR core processor powers the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. The device has 27 I/Os. A component with the same part number as ATMEGA48PB can be compared to other similar components. The terminals of this device are set to QUAD. This circuit consists of 32 terminationals. The electrical component is part of the series AVR? ATmega. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is constructed from 32 pins. During the mounting process, the device is mounted based on the Surface Mount method. The devices have a maximum memory size of 4kB that can be used to store programs and data. When working at a frequency of 20MHz it is able to achieve excellent efficiency. 5.5V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are currently 3 timers/counters set up on the system. An oscillator type Internal is required for it to work.
ATMEGA48PB-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATMEGA48PB-MU Applications
There are a lot of Microchip Technology ATMEGA48PB-MU Microcontroller applications.
- Electromechanical control
- Speed meter
- Hand-held metering systems
- Process control devices
- Air fryers
- Guidance-GPS
- Aerospace navigation systems
- Smart instruments
- Glucose monitoring systems (for Type 1 Diabetes)
- Virtual reality VR robots
