ATMEGA48V-10MMH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3V |
| Terminal Pitch | 0.45mm |
| Frequency | 10MHz |
| Base Part Number | ATMEGA48 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 23 |
| Speed | 20 MHz |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 12mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 2 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA48V-10MMH Overview
Due to the benefits of saving space, it is available in the 28-VFQFN Exposed Pad package. Surface Mount is used for mounting. In the package Tray, it is included. With a processor of AVR cores, the device is powered. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 23 I/Os on it, which makes it a very simple device. It has a part number of ATMEGA48 that can be used to locate similar components. The position of the device is QUAD at terminal. Currently, it consists of 28 terminationals. Part of the AVR? ATmega series, this electrical component is used in a variety of applications. Because the supply voltage is 3V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed with 28 pins. Based on the Surface Mount method, it is mounted. In Microcontrollers, this component is included. Using the devices' 4kB memory size, you can store programs and data. In this case, 12mA represents the maximum current supply. It is powered by a 2/5V?source. The system is highly efficient when working at a frequency of 10MHz. There are currently 3 timers/counters set up on the system. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.8V. Using a Internal oscillator type, it works well.
ATMEGA48V-10MMH Features
28-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA48V-10MMH Applications
There are a lot of Microchip Technology ATMEGA48V-10MMH Microcontroller applications.
- Mice
- Radio
- Communication-bluetooth, Wi-Fi, radio
- Hard drives
- Leakage current tester
- Medical instruments chromatographs
- Information appliances (networking of household appliances)
- Heart rate monitors
- Temperature sensing and controlling devices
- Sonography (Ultrasound imaging)
