ATMEGA640V-8CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2007 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 8MHz |
| Base Part Number | ATMEGA640 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 86 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 14mA |
| Bit Size | 8 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 8 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 6 |
| Address Bus Width | 16 |
| EEPROM Size | 4K x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA640V-8CU Overview
As a result, it is available in the 100-TFBGA package. Surface Mount is the way to mount it. It comes in a Tray package. AVR core processor is present on the device. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 86 I/Os on it. Based on the ATMEGA640 base part number, it can be compared with other components. The terminals are positioned at BOTTOM. It consists of 100 terminationals. This electrical component is part of the AVR? ATmega series. As a result of the 3V supply voltage, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. 100 pins are used to construct it. The method of Surface Mount is used to mount it. Microcontrollers contains this component. The devices have a memory size of 64kB that can be used to store programs and data. It is important to note that the maximum supply current is 14mA. A 2/5V source of power is being used to run it. It performs extremely well at a frequency of 8MHz. There are currently 6 timers/counters set up on the system. There is also a property of ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 4 MHZ on it. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.7V. Using an oscillator type of Internal, it works.
ATMEGA640V-8CU Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA640V-8CU Applications
There are a lot of Microchip Technology ATMEGA640V-8CU Microcontroller applications.
- Automatic staplers
- Electronic jamming systems
- Hand-held metering systems
- Accu-check
- Dishwashers
- Information appliances (networking of household appliances)
- Guidance-GPS
- Speed meter
- Printers
- Home appliances
