Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
44-TQFP |
Number of Pins |
44 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Published |
1997 |
Series |
AVR® ATmega |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
44 |
Subcategory |
Microcontrollers |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
5V |
Frequency |
20MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ATMEGA644P |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
2-Wire, I2C, SPI, UART, USART |
Memory Size |
64kB |
Oscillator Type |
Internal |
Number of I/O |
32 |
RAM Size |
4K x 8 |
Memory Type |
EEPROM, FLASH |
Voltage - Supply (Vcc/Vdd) |
2.7V~5.5V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Core Processor |
AVR |
Peripherals |
Brown-out Detect/Reset, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
8-Bit |
Program Memory Size |
64KB 32K x 16 |
Connectivity |
I2C, SPI, UART/USART |
Supply Current-Max |
9mA |
Bit Size |
8 |
Data Converter |
A/D 8x10b |
Watchdog Timer |
Yes |
Access Time |
20 μs |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
8b |
Number of Timers/Counters |
3 |
Address Bus Width |
8b |
Density |
512 kb |
EEPROM Size |
2K x 8 |
Number of ADC Channels |
8 |
Number of PWM Channels |
6 |
Number of I2C Channels |
1 |
Height |
1.05mm |
Length |
10.1mm |
Width |
10.1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
ATMEGA644P-20AU Overview
To save space, it is included in the 44-TQFP package. It is mounted using the way of Surface Mount. Package Tray contains it. The device has a AVR core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. There are 32 I/Os on the board. It has a base part number of ATMEGA644P that can be used to find other components that are comparable. The terminals of this device are set to QUAD. In this case, there are 44 terminationals. An electrical component such as this is included in the series AVR? ATmega. By using a 5V voltage supply, high efficiency is possible. Storage of data is performed using memory type EEPROM, FLASH. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 44 pins are required to construct this device. A method of mounting is used, which is Surface Mount. Subcategory Microcontrollers includes this component. In the device, there is a memory capacity of 64kB which may be used to store programs and data. Supply current is maximum at 9mA. Using a frequency of 20MHz, it is very efficient. A total of 3 timers/counters have been set up. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. An oscillator type Internal is required for it to work.
ATMEGA644P-20AU Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA644P-20AU Applications
There are a lot of Microchip Technology ATMEGA644P-20AU Microcontroller applications.
- Fabric
- Broadband technology, video and voice processing
- Electromechanical control
- Hand-held metering systems
- Torpedo guidance
- DCS control intelligent sensor
- Glucose monitoring systems (for Type 1 Diabetes)
- Switches
- Home appliances
- Smart instruments