banner_page

ATMEGA644P-20PQ

64KB 32K x 16 FLASH AVR 8-Bit Microcontroller AVR? ATmega Series ATMEGA644P 40 Pin 20MHz 5V 44-TQFP


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-ATMEGA644P-20PQ
  • Package: 44-TQFP
  • Datasheet: PDF
  • Stock: 851
  • Description: 64KB 32K x 16 FLASH AVR 8-Bit Microcontroller AVR? ATmega Series ATMEGA644P 40 Pin 20MHz 5V 44-TQFP (Kg)

Details

Tags

Parameters
Additional Feature OPERATES AT 2.7 V MIN @ 10 MHZ
Technology CMOS
Terminal Position DUAL
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 20MHz
Base Part Number ATMEGA644P
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Interface 2-Wire, I2C, SPI, UART, USART
Memory Size 64kB
Oscillator Type Internal
Number of I/O 32
RAM Size 4K x 8
Voltage - Supply (Vcc/Vdd) 2.7V~5.5V
uPs/uCs/Peripheral ICs Type MICROCONTROLLER, RISC
Core Processor AVR
Peripherals Brown-out Detect/Reset, POR, PWM, WDT
Program Memory Type FLASH
Core Size 8-Bit
Program Memory Size 64KB 32K x 16
Connectivity I2C, SPI, UART/USART
Bit Size 8
Data Converter A/D 8x10b
Has ADC YES
DMA Channels NO
Data Bus Width 8b
PWM Channels YES
DAC Channels NO
Number of Timers/Counters 3
EEPROM Size 2K x 8
On Chip Program ROM Width 16
Screening Level TS 16949
Height Seated (Max) 4.826mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Contact Plating Tin
Mount Through Hole
Mounting Type Surface Mount
Package / Case 44-TQFP
Number of Pins 40
Operating Temperature -40°C~105°C TA
Packaging Tube
Published 1997
Series AVR® ATmega
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 40

ATMEGA644P-20PQ Overview


Due to the benefits of saving space, it is available in the 44-TQFP package. A Surface Mount mounting method is used. It comes in a Tube package. With a processor of AVR cores, the device is powered. It is important to keep the temperature at -40°C~105°C TA while working. In terms of its program memory type, it is FLASH. The device has 32 I/Os. To find comparable components, use the ATMEGA644P base part number. A DUAL position is assigned to its terminals. As far as terminations are concerned, there are 40 terminations present. There are a number of electrical components in the AVR? ATmega series, including this one. By using a 5V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 40 pins are required to construct this device. It is mounted based on the method of Through Hole. A device with a memory size of 64kB can store programs and data. The system is highly efficient when working at a frequency of 20MHz. In total, there are 3 timers and counters. In addition, it is also capable of having the property OPERATES AT 2.7 V MIN @ 10 MHZ. A supply voltage (Vsup) above 4.5V is necessary for normal operation. There is an oscillator type Internal used in this circuit.

ATMEGA644P-20PQ Features


44-TQFP package
Mounting type of Surface Mount

ATMEGA644P-20PQ Applications


There are a lot of Microchip Technology ATMEGA644P-20PQ Microcontroller applications.

  • Communication-bluetooth, Wi-Fi, radio
  • Missile control
  • Guidance-GPS
  • Traditional industrial transformation
  • Fax machines
  • Industrial robot
  • Electronic jamming systems
  • Hard drives
  • Oil and gas
  • Microwave ovens

Write a review

Note: HTML is not translated!
    Bad           Good