ATMEGA644PA-AU
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA644PA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 8 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 10.1mm |
| Width | 10.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | AVR® ATmega |
ATMEGA644PA-AU Overview
As a result, it is available in the 44-TQFP package. Mounted using Surface Mount. Package Tray contains it. With a processor of AVR cores, the device is powered. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. A total of 32 I/Os are present. Other components that are comparable to it have the base part number ATMEGA644PA. At QUAD, its terminals are located. 44 terminationals are present. AVR? ATmega is the series number of this electrical component. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. 44 pins are used to construct it. The method of Surface Mount is used to mount it. The component is included in Microcontrollers. The devices have a maximum memory size of 64kB that can be used to store programs and data. Supply current is maximum at 9mA. Power comes from a source of 2/5V. Using a frequency of 20MHz, it is very efficient. There are currently 3 timers/counters set up on the system. Internal is the oscillator type it uses.
ATMEGA644PA-AU Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA644PA-AU Applications
There are a lot of Microchip Technology ATMEGA644PA-AU Microcontroller applications.
- Dryers
- Mobile computers
- Temperature sensing and controlling devices
- Security systems
- Mice
- Laminators
- Hard drives
- Xbox
- Toys
- Microwave ovens
