ATMEGA644PV-10PU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 40 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | ATMEGA644P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | 2-Wire, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 32 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 2K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 1 |
| Height | 4.826mm |
| Length | 52.58mm |
| Width | 13.97mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATMEGA644PV-10PU Overview
As a result, it is available in the 40-DIP (0.600, 15.24mm) package. The way of Through Hole is used to mount it. A package of Tube contains it. With a processor of AVR cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 32 I/Os are present on the device. Based on its base part number of ATMEGA644P, other similarly-sized components can be found. This device has terminals at DUAL. It has 40 terminationals. The electrical component is part of the series AVR? ATmega. Because of the 5V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 40 pins are used. The method of Through Hole is used to mount it. In Microcontrollers, this component is included. The devices have a maximum memory size of 64kB that can be used to store programs and data. It should be noted that 9mA represents the maximum supply current. A 2/5V power source powers it. Working at a frequency of 10MHz results in excellent efficiency. 3 counters/timers are currently active. Normally, the supply voltage (Vsup) should remain above 2.7V. An oscillator of type Internal is used.
ATMEGA644PV-10PU Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATMEGA644PV-10PU Applications
There are a lot of Microchip Technology ATMEGA644PV-10PU Microcontroller applications.
- Mice
- Vacuum cleaners
- Safety -airbags, automatic braking system (ABS)
- Fabric
- Medical instruments chromatographs
- Petrochemical
- Pacemakers (used to control abnormal heart rhythm)
- Industrial instrumentation devices
- Embedded gateways
- Removable disks
