ATMEGA6450P-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | ATMEGA6450P |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 69 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 6.2mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 14.1mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATMEGA6450P-AU Overview
A space-saving advantage is that it is included in the 100-TQFP package. Surface Mount is used for mounting. You can find it in the package of Tray. It is equipped with a AVR core processor. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 69 I/Os are present on the device. To find equivalent components, use its ATMEGA6450P base part number. The position of the device is QUAD at terminal. A 100 termination is contained within it. An electrical component such as this is included in the series AVR? ATmega. The supply voltage of 5V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. 100 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. In Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 64kB. In this case, 6.2mA represents the maximum current supply. Power is provided by a 2/5V source. At a frequency of 20MHz, it exhibits excellent efficiency. In total, there are 3 timers and counters. Using an oscillator type of Internal, it works.
ATMEGA6450P-AU Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA6450P-AU Applications
There are a lot of Microchip Technology ATMEGA6450P-AU Microcontroller applications.
- Data acquisition and control
- Smart instruments
- Guidance-GPS
- Instrument control
- Scanners
- Auto-breaking system
- Electrocardiogram (EKG)
- Home appliances
- Communication-bluetooth, Wi-Fi, radio
- Switches
