ATMEGA645P-AUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATmega |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 16MHz |
| Base Part Number | ATMEGA645P |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Supply Current-Max | 6.2mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
ATMEGA645P-AUR Overview
A space-saving advantage is that it is included in the 64-TQFP package. Surface Mount is the way to mount it. Tape & Reel (TR) is the package that contains it. Device with AVR core processor issupported. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 54 I/Os are present on the device. To find equivalent components, use its ATMEGA645P base part number. At QUAD, it has its terminals. A 64 termination is contained within it. This electrical component is part of the AVR? ATmega series. By using a 5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 64 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. Subcategory Microcontrollers includes this component. In the device, there is a memory capacity of 64kB which may be used to store programs and data. A maximum supply current of 6.2mA is set. Power is provided by a source of 2/5V. The system is highly efficient when working at a frequency of 16MHz. There are 3 timers/counters. Moreover, it also has the property of ALSO OPERATES AT 2.7 V MINIMUM SUPPLY AT 8 MHZ AND 1.8 V MINIMUM SUPPLY AT 4 MHZ. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. It works with an oscillator type Internal.
ATMEGA645P-AUR Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA645P-AUR Applications
There are a lot of Microchip Technology ATMEGA645P-AUR Microcontroller applications.
- Accu-check
- Playstation
- Virtual reality VR robots
- Radio
- Automatic control
- Entertainment-radios, CD players, televisions
- Security systems
- Copiers
- Robots
- Food and beverage
