ATMEGA645V-8AUR
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | SPI, UART/USART, USI |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 2K x 8 |
| Number of Programmable I/O | 54 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | AVR® ATmega |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATMEGA645 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4K x 8 |
ATMEGA645V-8AUR Overview
For the purpose of saving space, it is available in the 64-TQFP package. Using Surface Mount, it is mounted. In the package Tape & Reel (TR), it is included. Device with AVR core processor issupported. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is its program memory type. A total of 53 I/Os are available on this device. A component with the same part number as ATMEGA645 can be compared to other similar components. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 64 terminations present. The electrical component is part of the series AVR? ATmega. Using the 3V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 64 pins are used to construct it. Based on the Surface Mount method, it is mounted. It belongs to the subcategory Microcontrollers. Data and programs may be stored on the devices which have a memory size of 64kB. Power comes from a source of 2/5V. The system is highly efficient when working at a frequency of 8MHz. There are currently 3 timers/counters set up on the system. 54 is the number of programmable I/O. There is also a property of ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4 MHZ on it. A supply voltage (Vsup) above 2.7V is necessary for normal operation. It works with an oscillator type Internal.
ATMEGA645V-8AUR Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATMEGA645V-8AUR Applications
There are a lot of Microchip Technology ATMEGA645V-8AUR Microcontroller applications.
- Embedded gateways
- Firewalls
- Instrument control
- Oil and gas
- Speed meter
- Refrigerators
- Ipod
- Radio
- Missile control
- Calculator
